[Guide] AllowableIPList.txt setting

When you run server on wide area network (WAN), you must config ip list can connect to server.
+>Open DataServer1\AllowableIPList.txt
0
//==============Loop Back=============//
127 0 0 1 1
//=========Local area network=========//
10 0 0 1 255

//=========Wide area network==========//
203 0 0 0 16777216
222 0 0 0 16777216
end

+Open DataServer2\AllowableIPList.txt
0
//==============Loop Back=============//
127 0 0 1 1
end

Now I explain this config:
+DataServer1\AllowableIPList.txt
16777216 = 256*256*256
203 0 0 0 16777216 ====> 203.0.0.0 to 203.255.255.255 can connect.
+DataServer2\AllowableIPList.txt
127 0 0 1 1 ===>Because however DataServer never use

good..